Catalinbread RAH Overdrive

229,00 

Catalinbread RAH Overdrive

Nicht vorrätig

Artikelnummer: CB0016 Kategorien: , ,

Beschreibung

Overdrive inspired by the 1970 Royal Albert Hall performance.
Authentic 3 knob tone stack from the „Jimmy Page“ Hiwatt.
Designed to give incredible dynamic response with your pick attack and your guitar’s controls.
Includes a Herco pick for chirpy articulation.

Technical Specifications
2.34″ x 4.39″ pedal
Battery operation or 9v Negative Tip DC Power
4 mA draw

• The MASTER controls output volume. For best response, set it just past unity volume – usually around noon. (Unity volume means the volume with pedal on is about the same as with the pedal off.)
• The GAIN control corresponds to the “Input Volume” control on the actual Page amp. The sweet spot for this control is from 3:00 to max for the best Zep-like response. But for a cleaner response or if your guitar has really hot pick- ups you may want to try lower gain settings.
• The three TONE controls represent the exact circuitry of the Jimmy Page Hiwatt and will act the same and provide the same tonal response. As with most “passive” amp tone circuits, the three controls are highly interactive – changing the setting of one may affect the behavior of the other knob. Tone circuits like these are NOT active circuits designed to function like your home theater, car stereo or PA. Tone circuits like these are designed to provide fine tuning over the range of the guitar spectrum as well as being the actual voice of any specific amp.