Description
Strømforsyning 9V DC 3000 mA for effektpedaler/pedalboard, inkl Deluxe Daisy Chain kabel med 6 x standard negativt center, 2,1mm DC kabler for pedaler fra Boss, Danelectro, Dunlop, Digitech, Ibanez, Korg, Morley, MXR, Zoom m fl.. Adapterkabler findes som ekstra tilbehør for de fleste pedaler fra f.eks Line 6, Electro Harmonix m fl. Kan forsyne 1 til 30 pedaler uden støj.
Diago Powerstation 9V 3000mA Effects Pedal Power Supply, the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum.
Powering multiple effects pedals has long been a problem, and there are many power supplies available at varying costs, quality, compatibility and performance. Most pedal power supplies are transformer type, linear regulated designs, which are cheap to design and develop, but are expensive to make (and therefore buy), noisier, bigger, heavier and they get much hotter!
Cheaper power supplies are usually under-rated, unregulated, poorly filtered designs that polute your guitar’s signal with splurges of noise and hum. More expensive power supplies are often engineering marvels, but there really is no need and they cost far too much.
The Diago Powerstation uses switch mode technology, making it quiet, light, efficient and small, reliably powering your pedals so you can concentrate on making music.
10 reasons why you should buy a Diago Powerstation:
– It will power over 95% of pedals, including some quirky stuff like the Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4).
– It can power from 1 to 30 pedals (with enough daisy chain cables) with ease.
– It automatically supplies the required amount of current, up to 3,000mA which is:
– 10 x most plug top / wall wart type power supplies
– 6 x the Power Bank / Signal Flex
– 4 x the £160 Voodoo Lab Pedal Power 2
– It’s quiet – uses studio quality components for hum and noise free operation.
– It’s small – much like the power supply you’d get with a laptop.
– It’s light – so it can be Velcroed down to your pedal board (Velcro supplied).
– It’s tough – the heavy duty ABS case is durable and shock resistant.
– It’s efficient – around 80% compared with around 45% for those mentioned above, so it doesn’t get hot.
– It will work in any country without the need for step-up or step down transformers (accepts 90-264V AC input at 50-60Hz). We supply the correct 2m (6ft) mains cable when you buy it in your own country, and it’s possible to buy ones for other countries if you go on tour or move abroad.
– It’s safe – the design includes short circuit and voltage protection, and meets all national and international safety regulations so that you or your pedals won’t fry!
Model Diago Powerstation PS-01
Output 9V DC @ 3000 mA (27W)
Input 90-264VAC @ 50-60Hz
Efficiency ~80%
Line Regulation ±0.5% max
Load Regulation ±1% max
Mains Cable Inlet 2m figure 8 lead IEC320-C8
Output Barrel 2.1 x 5.5 x 12mm female barrel, centre -ve
Dimensions 105mm(L) x 44mm(W) x 29mm(D)
Protection Short circuit, overload & over voltage protection
Operating Temperature 0°C to +40°C
Storage Temperature -40°C to +85°C
Approval CE, UL, cUL, TUV, CB, BSMI, RoHS and WEEE
Weight ~200g
Package
1x Diago Powerstation Power Supply
1x Diago Deluxe Daisy Chain
1x 2m mains power cable
